Waterproofing & Construction Supplies
   
   
   
 
Welcome to BCS Products Limited
CHEMICALS
Mould Release
Agents
Environmentally
Friendly
Concrete
Curing Aid
Concrete
Curing Membrane
Formwork Repair
Compounds
Formwork Repair
Compound
Formwork Sealer
Coatings
Concrete Surface
Retarders
Spray
Applicators
Frost Blankets
Bolt Boxes
Contact Us


  BCS Products Limited
  Caenby Corner
  Industrial Estate
  Hemswell Cliff
  Nr. Gainsborough
  Lincolnshire DN21 5TU

  Tel: (01427) 668187
  Fax: (01427) 668012


  E-mail:
  sales@bcsproducts.co.uk


  Concrete Repairs   Brickwork Accessories   Concrete Spacers   Floor Slab Accessories
  Formwork Accessories   Reinforcing   Ground Preparation   Waterproofing
  Cementitious Grouts   Mould Oil & Curing
  Joint Filler Boards   Joint Sealants
  Flooring   CONTACT   Home

MOULD OIL, CURING AND FORM TREATMENTS
MOULD RELEASE AGENTS
CHEMICAL RELEASE AGENTS.

A blend of fatty acids in an evaporative carrier which provide a stain free concrete finish of the highest quality with excellent strip. Listed by WBS for drinking water projects. Spray applied to all types of impermeable formwork to give superior concrete finish and release.
BCA Category 5

MOULD OILS WITH SURFACTANTS.
A special blend of oils with highly active surfactants which give excellent release with no staining BCA category 2 All types of commonly used formwork but particularly sealed or unsealed plywood. Produces stain free surfaces.

ENVIRONMENTALLY FRIENDLY
Environmentally safe mould release oil (BCA Category 2/5) Solution of vegetable oils with a blend of fatty acids that provide a stain free concrete finish of the highest quality with excellent strip.

CONCRETE CURING AID Water based Curing Agent
Aqueous silicate solution that reacts to deposit an integral layer of high cohesive strength crystals to provide a permanent membrane. WBS Listed for drinking water projects. Low cost general purpose curing. Will not restrict bond of subsequent coatings intended for use
with concrete. Available in Fugitive Dye Tinted form to suit specification and improve visual indication of application.

CONCRETE CURING MEMBRANE
RESIN BASED CURING COMPOUND OF 90% EFFICIENCY.

Solution of inert resins in evaporative solventxs with a higher curing efficiency for use in strong sunlight conditions and where DTp stipulate aluminised for highways, bridges, runways, etc.

COMBINED CURING AGENT AND SEALER
75% curing efficiency to ASTM C390 A single pack acrylic coating which cures and seals interior and exterior concrete surfaces to produce a harder wearing surface and eliminate dusting.

FULL DATA SHEETS & TECHNICAL SPECIFICATIONS ARE AVAILABLE - PLEASE CALL: 01427 668187